CAREL Easy Cool Pre-Programmed Controller for Static Refrigeration Applications. C/W 1 x NTC Probe

Model Number

Easy Cool : PZD0SNP0E1

Temperature static refrigeration -50/+90, 230v 50/60hz, c/w 1 ntc probe 1 relay, 12(5)a, screw terminals (12a) pre-programmed, does not come with clips. 

Refrigeration Controllers
Controllers for refrigerators or freezer applications. Conveniently supplied pre-programmed to suit most static refrigeration units (EASY COOL), forced air coolers & chillers and freezer rooms and cabinets (EASY FREEZE).

Overview
The ideal solution for static plug-in refrigeration units at normal temperature (above 0 °C).

Features

• Controller factory programmed and ready to be used
• NTC room probe included
• Limited number of parameters
• 31mm thick
• 16A Compressor relay (12(2)A EN60730-1 250VAC)

 
Pre-Programme Set-Up Overview

• Easy Cool: Set-point; 3°C, Differential; 2°C, Defrost; Off Cycle, 20mins every 6 hours
• Easy Freeze: Set-point; -18°C, Differential; 2°C, Defrost; Electric, 25mins every 6 hours.
• For forced air chillers, simply adjust Easy Freeze set point to desired temperature.
• Easy to set  thanks to the limited number of parameters
• Easy to install thanks to the probes included in the packaging

Notes

• All electronics products purchased should be installed by engineers or professionals familiar with its use and application.
• We do not accept returns if the item packaging is opened or if the item has been used.
• A 25% re-stocking fee will be charged on items returned in their original packing and in unused condition.
• Outward carriage is not refundable.
• Under-warranty items returned will be sent to the manufacturers for inspection for any manufacturing defect, and a refund or exchange will be provided as appropriate.